Lexmark e321 安装指南
25
Attach cables
If you see a message other than
Ready
on the display, refer to
the publications CD for instructions on clearing the message.
Click
Click
Printing
, and then click Understanding printer
messages.
4
Turn on your computer and any other peripherals.
5
Parallel cable
A parallel port requires an IEEE-1284 compliant parallel cable such as
Lexmark part number 1329605 (3 m [10 ft]) or 1427498 (6 m [20 ft]).
Lexmark part number 1329605 (3 m [10 ft]) or 1427498 (6 m [20 ft]).
Attaching a
network cable
network cable
You can attach your Lexmark E323n printer to a network using
standard network cables.
standard network cables.
Ethernet cable
A 10BaseT/100BaseTx Fast Ethernet port is standard on the network
model.
model.
To attach the printer to a network:
1
Make sure the printer is turned off and unplugged.
2
Plug one end of the standard network cable into a LAN drop or
hub and the other end into the Ethernet port on the back of the
printer. The printer automatically adjusts for the network speed.
hub and the other end into the Ethernet port on the back of the
printer. The printer automatically adjusts for the network speed.
3
Plug one end of the printer power cord into the socket at the
back of the printer and the other end into a properly grounded
outlet.
back of the printer and the other end into a properly grounded
outlet.
4
Now turn on the printer.
After the printer completes its internal tests, the
Ready
message indicates that the printer is ready to receive jobs.
Use Category 5 cable with an RJ-45
connector for the standard network
port.
connector for the standard network
port.