Cisco me-4924-10ge 安装指导
1-2
Cisco ME 4924-10GE Ethernet Switch Hardware Installation Guide
OL-10071-01
Chapter 1 Product Overview
Features
•
Serial console management port using an RJ-45 interface
•
A removable automatic variable speed fan tray for low noise operation at room temperature
•
256-MB SDRAM (fixed)
•
64-MB embedded Flash memory
•
48 Gbps switching capacity at the ports, 102 million packets-per-second actual forwarding rate
•
EtherChannel at 1 Gbps and 10 Gbps
•
Hardware-based access lists
•
Storm control in hardware
Software Features
This switch uses software developed for Catalyst 4500 series switches. The Cisco ME 4924-10GE
software provides:
software provides:
•
Support for 55,000 MAC addresses for Layer 2 switching
•
Support for 4,096 VLANs and 4,096 VLAN IDs
–
IEEE 802.1Q VLAN tagging on all ports
–
Cisco Inter Switch Link (ISL) tagging on all ports
•
64,000 multicast forwarding entries and 16,000 unicast forwarding entries
•
1022 ingress policers and 1022 egress policers
•
32,000 ingress Security ACEs and 32,000 egress Security ACEs
•
Support for port aggregation using Port Aggregation Protocol (PAgP) for Gigabit EtherChannel
•
Catalyst 4500 series management software features include the following:
–
Command-line interface (CLI) and Simple Network Management Protocol (SNMP) interfaces
consistent with the Catalyst 4500 series switches
consistent with the Catalyst 4500 series switches
–
Compatible development of new features with the Catalyst 4500 series switches
–
Support for out-of-band management over serial lines through a terminal attached to the console
interface
interface
–
Support for in-band management through any switch port through SNMP, Telnet client, and
Trivial File Transfer Protocol (TFTP)
Trivial File Transfer Protocol (TFTP)
–
Remote Monitoring (RMON)
–
Support for standard Layer 2 features: 802.1D Spanning Tree, Cisco Discovery Protocol (CDP),
VTP version 2 with pruning extensions, and Cisco Group Management Protocol (CGMP) client
VTP version 2 with pruning extensions, and Cisco Group Management Protocol (CGMP) client
•
Embedded management features include the following:
–
Full SNMP instrumentation including entity-Management Information Base (MIB), all relevant
standard MIBs, and all relevant Cisco MIBs
standard MIBs, and all relevant Cisco MIBs
–
Support for the first four RMON groups (Ethernet Statistics, Alarms, Events, and History) on a
per-port basis without the need for an optional RMON processing module
per-port basis without the need for an optional RMON processing module
–
Performance management information
–
Embedded CiscoView support