GE PSB42YGXSV 用户指南
3/4
″
FRAMED CUSTOM PANEL OPTION
For a more custom appearance, 3/4
″
framed custom panels
may be installed on trimmed models. The overlay panel is
secured to a 1/4
secured to a 1/4
″
finished backer panel. The assembled custom
panel then slides into the trim with the same procedure
described on page 37.
described on page 37.
3/4
″
FULL-WIDTH OVERLAY
CUSTOM PANEL OPTION
This design provides a nearly trimless appearance. The full width
overlay panel covers most of the door trim. In this design, a spacer
panel must be installed between the finished backer and overlay panel.
overlay panel covers most of the door trim. In this design, a spacer
panel must be installed between the finished backer and overlay panel.
NOTE: Left-to-right offset is not equal
to top-to-bottom offset.
to top-to-bottom offset.
NOTE: Left-to-right offset is not equal
to top-to-bottom offset.
to top-to-bottom offset.
.250 + .750 = 1.000 Maximum Total Panel Thickness
IMPORTANT NOTE: Maximum total weight
is 70 pounds for any assembled Fresh Food
panel, 45 pounds total for the Freezer panels
and 15 pounds for the grille panel.
is 70 pounds for any assembled Fresh Food
panel, 45 pounds total for the Freezer panels
and 15 pounds for the grille panel.
3/4"
Custom
Overlay
Overlay
Panel
1/4"
Backer
Panel
Door
3/4"
Overlay Panel
Backer Panel
Custom
Overlay
Panel
Overlay
Panel
1/4"
Backer
Panel
Door
.10 Inch
Spacer
Installation Instructions
22
.250 + .10 + .750 = 1.100 Maximum Total Panel Thickness
Spacer Panel
Overlay Panel
Backer Panel