Advantek Networks adr-18cu 用户指南

Configure IP Address Manually:
Step 5: Select 

Use the following IP address and Use the following DNS server 

addresses.  

 

IP address: Fill in IP address 10.0.0.x (x is a number between 4 to 15).
Subnet mask: Default value is 255.0.0.0.
Default gateway: Default value is 10.0.0.2.
Preferred DNS server: Fill in preferred DNS server IP address.
Alternate DNS server: Fill in alternate DNS server IP address.

You can use ping command under DOS prompt to check if you have setup TCP/IP protocol correctly 

and if your computer has successfully connected to this router.

1)  Type 

ping 10.0.0.2 under DOS prompt and the following messages will appear:

Pinging 10.0.0.2 with 32 bytes of data:

 

  Reply from 10.0.0.2 : bytes=32 times<2ms TTL=64

 

  Reply from 10.0.0.2 : bytes=32 times<1ms TTL=64

 

  Reply from 10.0.0.2 : bytes=32 times<10ms TTL=64

If the communication link between your computer and router is not setup correctly, after you type 

ping 10.0.0.2 under DOS prompt following messages will appear:

 

 

  

 

Pinging 10.0.0.2 with 32 bytes of data:

 

 

Request timed out. 

 

 

Request timed out.

 

 

Request timed out.

This failure might be caused by cable issue or something wrong in configuration procedure.