Advantek Networks awr-11n-rt 用户指南

automation of static routing maintenance. The router, using the RIP (Routing Information

Protocol) protocol, determines the network packet’s route based on the fewest number of

hops between the source and the destination. In this case, you could automatically adjust to

physical changes in the network layout.

Enable:

Enable/Disable the RIP server. Default setting is Disable.

Working Mode:

Select whether the wireless broadband router acts like Router or Gateway.

Receive Mode:

Enable this mode to allow RIP server to receive routing information and

updating the routing information.

Sending Mode:

Enable this mode to allow RIP server sending out routing information and

updating the routing information.

3.3 Wireless Settings

The wireless settings can be quickly configured as a wireless access point for roaming client

by setting the access identifier and channel number. It also supports data encryption and

client filtering.

3.3.1 Basic Setting

This function allows you to define SSID, and Channel for the wireless connection. These

parameters are used for the wireless stations to connect to the Access Point. Click Basic

Setting on Wireless Settings, below screen will prompt for Basic Setting.