Alcatel-Lucent 6850-48 网络指南
Configuring IP Multicast VLAN
IPMVLAN Application Example
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
page 43-13
IPMVLAN Application Example
The figure below shows a sample IPMVLAN network with three customers A, B, and C, respectively.The
customers are connected to the Ethernet switch requesting multicast data.
customers are connected to the Ethernet switch requesting multicast data.
.
Example of an IMPVLAN Network
Follow the steps below to configure this network:
Note. All the steps following step 1 (which must be executed first) may be entered in any order.
1 Create an IPMVLAN
by entering:
-> vlan ipmvlan 1003 name "multicast vlan"
2 Assign IPv4/IPv6 address to the IPMVLAN by entering:
-> vlan ipmvlan 1003 address 225.0.0.1
3 Create a sender port in the Enterprise mode of IPMVLAN by entering:
-> vlan ipmvlan 1003 sender-port port 1/50
Ethernet Switch
Core Unicast
and
Multicast Router
and
Multicast Router
Customer A
Customer B
Customer C