Alcatel-Lucent 6850-48 网络指南
Verifying the VPLS Configuration
Configuring VPLS
page 11-32
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
Verifying the VPLS Configuration
You can use CLI show commands to display the current configuration and statistics of VPLS service enti-
ties on a switch. These commands include the following:
ties on a switch. These commands include the following:
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide.
ence Guide.
Displays the access port configuration.
Displays the Layer 2 profiles configured for the switch.
Displays the customer account configuration.
show service sdp
Displays the SDP configuration for the switch.
Displays detailed configuration information about the specified ser-
vice ID, including the SDP and SAP configuration associated with
the service.
vice ID, including the SDP and SAP configuration associated with
the service.
Displays the Service Access Point (SAP) usage for the switch.
Displays the Service Distribution Point (SDP) usage for the switch.
Displays the services that are using a specific egress label or a range
of egress labels.
of egress labels.
Displays the services that are using a specific ingress label or a range
of ingress labels.
of ingress labels.
Displays forwarding database (FDB) information for the router.