Alcatel-Lucent 6850-48 网络指南

Verifying 802.1Q Configuration

Configuring 802.1Q

page 21-10

OmniSwitch AOS Release 6 Network Configuration Guide

The following steps apply to Stack 3. They will attach ports 4/1 and 4/2 as link aggregation group 5 to 
VLAN 3.

1 Configure static link aggregation group 5 by entering the following:

-> static linkagg 5 size 2

2 Assign ports 4/1 and 4/2 to static link aggregation group 5 by entering the following two commands:

-> static agg 4/1 agg num 5

-> static agg 4/2 agg num 5

3 Create VLAN 3 by entering the following:

-> vlan 3

4 Configure 802.1Q tagging with a tagging ID of 3 on static link aggregation group 5 (on VLAN 3) by 
entering the following:

-> vlan 3 802.1q 5

5 Check the configuration by using the 

 command, as follows:

-> show 802.1q 5

Tagged VLANS

Internal Description

-------------+-------------------------------------------------+

3

TAG AGGREGATE 5 VLAN 3

To display information about the ports configured to handle tagging, use the following show command:

For more information about the resulting display, see 

 in the 

OmniSwitch CLI Reference Guide. 

Displays 802.1Q tagging information for a single port or a link aggrega-
tion group.