Alcatel-Lucent 6850-48 参考指南
MPLS LDP Commands
OmniSwitch CLI Reference Guide
September 2009
page 24-45
show router ldp bindings prefix
Displays the LDP bindings for a specific IP prefix.
show router ldp bindings prefix ip-prefix/mask [session ip-address[:label-space]]]
Syntax Definitions
ip-prefix
The IP address prefix used to identify the IP network. Specify 0 for the
host bits.
host bits.
mask
The IP address mask used to identify the subnet address within the IP
address prefix.
address prefix.
ip-address
The LDP router ID (Loopback0 IP address configured for the switch)
for a specific LDP session.
for a specific LDP session.
:label-space
The label space ID number that the router advertises on the LDP inter-
face. This value is appended to the LDP router ID address. The valid
range is 0–65535.
face. This value is appended to the LDP router ID address. The valid
range is 0–65535.
Defaults
By default, LDP bindings are displayed for all sessions associated with the specified prefix.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use the session parameter to display prefix binding information for a specific LDP router session. Note
that entering a label-space value is optional with this parameter.
that entering a label-space value is optional with this parameter.
Examples
->show router ldp bindings prefix 10.11.0.6/32
LDP LSR ID: 10.11.0.66
Legend: U - Label In Use, N - Label Not In Use
LDP Prefix Bindings
Prefix Peer IngLbl EgrLbl EgrIntf EgrNextHop
------------------+---------------+-------+------+-------------+---------------
10.11.0.6/32 10.10.0.7 131069N 131069 -- 55.55.55.77
No. of Prefix Bindings: 1