Alcatel-Lucent 6850-48 参考指南
MPLS LDP Commands
page 24-52
OmniSwitch CLI Reference Guide
September 2009
show router ldp bindings service-id
Displays the LDP bindings for the specified service.
show router ldp bindings service-id service-id
Syntax Definitions
service-id
The service ID number. The valid range is 1–2147483647.
Defaults
N/A.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
The service ID is a unique number that identifies a specific service. All LDP bindings associated with the
service ID are displayed.
service ID are displayed.
Examples
# show router ldp bindings service-id 100
LDP LSR ID: 10.11.0.6
Legend: U = Label In Use, N = Label Not In Use, W = Label Withdrawn,
S = Status Signaled Up, D = Status Signaled Down,
R = VPRN Service, V = VPLS Service, W = VPWS Service
TLV = (Type, Length: Value)
LDP Service FEC 128 Bindings
Type VCId SvcId SDPId Peer IngLbl EgrLbl LMTU RMTU
------+----------+----------+------+---------------+-------+-------+-----+-----
V-Eth 100 100 10 10.11.0.66 131068U 131068 1500 1500
No. of VC Labels: 1
LDP Service FEC 129 Bindings
AGI SAII TAII
Type SvcId SDPId Peer IngLbl EgrLbl LMTU RMTU
------+----------+----------+------+---------------+-------+-------+-----+-----
No. of FEC 129s: 1
output definitions
Type
The type of service (V-Eth) exchanging labels through the Service
Distribution Point (SDP).
Distribution Point (SDP).
VCId
The virtual connection (VC) ID number used by each end of the SDP
tunnel to identify the VC.
tunnel to identify the VC.