Alcatel-Lucent 6850-48 参考指南
MPLS LDP Commands
OmniSwitch CLI Reference Guide
September 2009
page 24-77
show router ldp status
Displays status information and statistics for the LDP instance on the local router.
show router ldp status
Syntax Definitions
N/A.
Defaults
N/A.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use the information and statistics displayed with this command to determine the status of the local LDP
instance.
instance.
Examples
->show router ldp status
LDP Status for LSR ID 10.10.0.7
Admin State: Up, Oper State: Up,
Created at: 03/25/2009 16:08:06, Up Time: 0d
18:38:14,
Last Change: 03/25/2009 16:08:06, Tunn Down Damp Time (sec): N/A,
Import Policies: None, Export Policies: None,
Active Adjacencies: 2, Active Sessions: 2,
Active Interfaces: 1, Inactive Interfaces: 0,
Active Peers: 1, Inactive Peers: 0,
Addr FECs Sent: 1, Addr FECs Recv: 2,
Serv FECs Sent: 1, Serv FECs Recv: 1,
Attempted Sessions: 0,
No Hello Err: 0, Param Adv Err: 0,
Max PDU Err: 0, Label Range Err: 0,
Bad LDP Id Err: 0, Bad PDU Len Err: 0,
Bad Mesg Len Err: 0, Bad TLV Len Err: 0,
Malformed TLV Err: 0, Keepalive Expired Err: 0,
Shutdown Notif Sent: 0, Shutdown Notif Recv: 0
output definitions
Adm
The administrative state of the LDP instance (Up or Down).
Opr
The operational state of the LDP instance (Up or Down).
Created at
The date and time the LDP instance was created.
Up Time
The length of time, in hundredths of seconds, that the LDP instance has
been operationally up.
been operationally up.