Alcatel-Lucent 6850-48 参考指南
MPLS Static LSP and FRR Commands
OmniSwitch CLI Reference Guide
September 2009
page 25-3
configure router mpls shutdown
Configures the administrative status of the MPLS protocol instance.
configure router mpls {no shutdown | shutdown}
Syntax Definitions
no shutdown
Enables the MPLS protocol instance.
shutdown
Disables the MPLS protocol instance.
Defaults
By default, MPLS is enabled for the switch.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Disabling the MPLS instance disables the Label Switched Paths attached to the instance, as well as any
Service Distribution Points (SDPs) and SDP bindings associated with the LSP. When the MPLS
instance is once again enabled, the attached LSPs will attempt to re-activate.
instance is once again enabled, the attached LSPs will attempt to re-activate.
• Note that deleting the MPLS instance is not allowed; there is no command for this purpose. Only
changing the administrative status of the instance is allowed.
Examples
-> configure router mpls no shutdown
-> configure router mpls shutdown
Release History
Release 6.4.2; command was introduced.
Related Commands
MIB Objects
vRtrMplsGeneralTable
vRtrMplsGeneralAdminState
Displays the status of the MPLS instance on the router.