Alcatel-Lucent 6850-48 参考指南

下载
页码 3444
Chassis Management and Monitoring Commands
page 2-42
OmniSwitch CLI Reference Guide
September 2009
show module
Displays the basic information for either a specified module or all modules installed in a standalone switch 
chassis or a stack. Modules include switches performing the primary and secondary CMM roles and 
Network Interface (NI) in a stack.
show module [number]
Syntax Definitions
number
The slot number for a specific module installed in a standalone switch 
chassis or the switch number within a stack. If no slot number is speci-
fied, information for all modules is displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E.
Usage Guidelines
This command may be used when logged into the switch that performs either the primary or secondary 
CMM role in a stack.
Examples
-> show module
                                    HW    Mfg
Slot     Part-Number     Serial #   Rev   Date      Model Name
-------+--------------+------------+---+-----------+----------------------------
CMM-1    902271-10      E23L9059     002 JUN 08 2004  OS6850
NI-1     902271-10      E23L9059     002 JUN 08 2004  OS6850
output definitions 
Slot
The chassis slot position of the module. For detailed slot numbering 
information, refer to the “Chassis and Power Supplies” chapter of the 
Hardware User Manual. Refer to 
 for additional information 
on CMM location callouts.
Part-Number
The Alcatel-Lucent part number for the module.
Serial #
The Alcatel-Lucent serial number for the module.
Rev
The hardware revision level for the module.
Date
The date the module was manufactured.
Model Name
The descriptive name for the module. For example, OS9-GNI-U24 
indicates a twenty four-port Gigabit Ethernet module.