Alcatel-Lucent 6850-48 参考指南
Virtual Private LAN Service (VPLS) Commands
page 26-74
OmniSwitch CLI Reference Guide
September 2009
show service l2profile
Displays the Layer 2 profile configuration information for the router. This type of profile is applied to
access (customer-facing) ports and specifies how to process Layer 2 protocol frames ingressing on such
ports.
access (customer-facing) ports and specifies how to process Layer 2 protocol frames ingressing on such
ports.
show service l2profile [profile-name]
Syntax Definitions
profile-name
An existing Layer 2 profile name. Use quotes around string if the profile
name contains multiple words with spaces between them (e.g., “Alcatel-
Lucent Engineering”).
name contains multiple words with spaces between them (e.g., “Alcatel-
Lucent Engineering”).
Defaults
By default, all profiles are displayed if a profile name is not specified with this command.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Use the profile-name parameter to display information for a specific profile. Entering a profile name is
case sensitive.
• If there are no profiles configured for the router, this command still displays the information for the
default profile (def-access-profile). This profile is applied to access ports that were not associated with
a specific profile.
a specific profile.
Examples
->show service l2profile
Port Profile Table
Profile Name Stp 802.1x 802.3ad 802.1ab GVRP AMAP
--------------------------------+-------+-------+-------+-------+-------+------
DropBPDU drop drop peer drop tunnel drop
Tunnel-Amap tunnel drop peer drop tunnel tunnel
def-access-profile tunnel drop peer drop tunnel drop
Number of Port Profiles: 3
->show service l2profile Tunnel-Amap
Port Profile Table
Profile Name
Stp
802.1x
802.3ad 802.1ab GVRP AMAP
--------------------------------+-------+-------+--------+--------+-------+------
Tunnel-Amap tunnel drop peer drop tunnel tunnel
Number of Port Profiles: 1