Alcatel-Lucent 6850-48 参考指南

Virtual Private LAN Service (VPLS) Commands

page 26-84

OmniSwitch CLI Reference Guide

September 2009

show service id all

Displays detailed configuration information about the specified service ID, including the SDP and SAP
configuration associated with the service.

show service id service-id all

Syntax Definitions

service-id

An existing VPLS ID number.

Defaults

N/A.

Platforms Supported

OmniSwitch 9000E

Usage Guidelines

The service ID is a unique number that identifies a specific VPLS. All information associated with the
service ID is displayed.

Examples

-> show service id 100 all

Service Detailed Information

Service Id: 100, Vpn Id: N/A,

Service Type: VPLS,

Customer Id: 1,

Last Status Change: 01/19/2009 13:09:36,

Last Mgmt Change: 01/19/2009 13:09:10,

Admin State: Up, Oper State: Up,

MTU: 1514, Def. Mesh VC Id: 100,

SAP Count: 5, SDP Bind Count: 1,

Snd Flush on Fail: Disabled, Host Conn Verify: N/A,

Propagate MacFlush: N/A

Service Destination Points(SDPs)

Sdp Id 10:100 -(10.11.0.6)

SDP Id: 10:100, Type: Mesh,

VC Type: Ether, VC Tag: n/a,

Admin Path MTU: 1514, Oper Path MTU: 1514,

Far End: 10.11.0.6, Delivery: LDP,

Admin State: Up, Oper State: Up,

Acct. Pol: N/A, Collect Stats: LDP,

Ingress Label: 131069, Egress Label:

131070,

Ing mac Fltr: n/a, Egr mac Fltr: n/a,

Ing ip Fltr: n/a, Egr ip Fltr: n/a,

Admin ControlWord: N/A, Oper ControlWord: False,

Last Status Change: 01/19/2009 13:10:48, Signaling: TLDP,

Last Mgmt Change: 01/19/2009 13:09:10, Force Vlan-Vc: Disabled,