Alcatel-Lucent 6850-48 参考指南

OmniSwitch CLI Reference Guide

page 27-1

Alcatel-Lucent’s 802.1AB is an IEEE standard for exchanging information with neighboring devices and 
maintaining a database of the information. The information is exchanged using the LLDPDU (Link Layer 
Discovery Protocol Data Unit) in TLV (Time, Length, Value) format. This chapter details configuring and 
monitoring 802.1AB on a switch.

Alcatel-Lucent’s version of 802.1AB complies with the IEEE 802.1AB-2005 Station and Media Access 
Control Discovery and ANSI-TIA 1057-2006 Link Layer Discovery Protocol for Media End Point 
Devices.

MIB information for the 802.1AB commands is as follows:

Filename:

IEEE_LLDP_Base.mib

Module:

LLDP-MIB

Filename:

IEEE_LLDP_Dot1.mib

Module:

LLDP-EXT-DOT1-MIB

Filename:

IEEE_LLDP_Dot3.mib

Module:

LLDP-EXT-DOT3-MIB

Filename:

ANSI_TIA_LLDP_MED.mib 

Module:

LLDP-EXT-DOT3-MIB

A summary of available commands is listed here:

Configuration procedures for 802.1AB are explained in the “Configuring 802.1AB” chapter of the 
OmniSwitch AOS Release 6 Network Configuration Guide.

lldp transmit interval
lldp transmit hold-multiplier
lldp transmit delay
lldp reinit delay
lldp notification interval
lldp lldpdu
lldp notification
lldp tlv management
lldp tlv dot1
lldp tlv dot3
lldp tlv med
show lldp system-statistics
show lldp statistics
show lldp local -system
show lldp local -port
show lldp local-management-address
show lldp remote-system
show lldp remote-system med