Alcatel-Lucent 6850-48 参考指南

802.1AB Commands

OmniSwitch CLI Reference Guide

page 27-13

Specifies the switch to control per port 802.1 TLVs to be incorporated in the LLDPDUs.

lldp {slot/port | slot | chassis} tlv dot1 {port-vlan | vlan-name} {enable | disable}

Slot number for the module and physical port number on that module 
(e.g., 3/1 specifies port 1 on slot 3).

The slot number for a specific module.

Enables or disables transmission of port VLAN TLV in LLDPDU.

Enables or disables transmission of VLAN name TLV in LLDPDU.

Enables 802.1 TLV LLDPDU transmission.

Disables 802.1 TLV LLDPDU transmission.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• The LLDPDU must be enabled and set to transmit before using this command. 

• If this command is applied to a slot or chassis, then the existing configuration related to this command 

will be lost.

• If one TLV is included then the other TLV is automatically included when you use this command.

-> lldp 5/1 tlv dot1 port-vlan enable

-> lldp 3 tlv dot1 vlan-name enable

-> lldp 3 tlv dot1 vlan-name disable

Release 6.3.1; command was introduced.