Alcatel-Lucent 6850-48 参考指南

Ethernet OAM Commands

OmniSwitch CLI Reference Guide

page 28-27

Enables the maintenance entity to initiate transmitting loopback messages (LBMs) and obtaining loop-
back replies.

ethoam loopback {target-macaddress mac_address | target-endpoint tar_mep_id}  source-endpoint 
src_mep_id domain {domain_name | mac_address} association  association_name [number 
number_of_messages] [data data_size] [vlan-priority vlan_priority] [drop-eligible {true | false}]

Target MAC address to be transmitted.

Specifies the MEP for which the Loopback message is targeted.

Specifies the MEP that transmits the Loopback message. The valid 
range is 1–8191.

Specifies the domain name.

 

For more information on the different 

formats of the domain name, refer to 

domain mac_address

Specifies the CFM system MAC address.

Name of the Ethernet OAM Association. Up to 48 (minus the domain 
name length) characters may be used.

Specifies the number of loopback messages to be transmitted. The range 
is 1–16.

Specifies the amount of data to be included in the Data Type Length 
Value (TLV), if the Data TLV is selected to be sent. The valid range is 
1–255.

Specifies the 3-bit value to be used in the VLAN tag, if present in the 
transmitted frame. The valid range is 0–7.

Sets the drop eligibility bit in the VLAN tag to true.

Sets the drop eligibility bit in the VLAN tag to false.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

1