Alcatel-Lucent 6850-48 参考指南
LINK OAM Commands
OmniSwitch CLI Reference Guide
September 2009
page 29-23
efm-oam multiple-pdu-count
Configures the value of multiple PDU count. When multiple PDU count is set to a specific number in case
of any of the threshhold cross events, the same event notification PDU will be transmitted that many times
towards the peer.
of any of the threshhold cross events, the same event notification PDU will be transmitted that many times
towards the peer.
efm-oam multiple-pdu-count count
Syntax Definitions
count
Specifies the number of PDUs that have to be sent in case of event-noti-
fication TLVs. The range is 1 to 10 PDUs.
fication TLVs. The range is 1 to 10 PDUs.
Defaults
By default, the PDU-count value is set to 3.
Platforms Supported
OmniSwitch 6400, 6850, 6855.
Usage Guidelines
N/A
Examples
-> efm-oam multiple-pdu-count 5
Release History
Release 6.4.2; command was introduced.
Related Commands
MIB Objects
alaDot3OamMultiplePduCount
Displays the global LINK OAM configuration.
Displays the configuration and details of the related parameters of
the remote port.
the remote port.