Alcatel-Lucent 6850-48 参考指南
IP Commands
OmniSwitch CLI Reference Guide
September 2009
page 32-9
ip router primary-address
Configures the router primary IP address. By default, the router primary address is derived from the first
IP interface that becomes operational on the router.
IP interface that becomes operational on the router.
ip router primary-address ip_address
Syntax Definitions
ip_address
32-bit IP address.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• The router primary address should be a valid IP unicast host address.
• The router primary IP address is used by BGP to derive its unique BGP Identifier, if the router
router-id is not a valid IP unicast address.
• It is recommended that the primary address be explicitly configured on dual CMM chassis or stacked
routers.
Examples
-> ip router primary-address 172.22.2.115
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaDcrTmConfig
alaDrcTmIpRouterPrimaryAddress
Configures the router ID for the router.