Alcatel-Lucent 6850-48 参考指南
IP Commands
OmniSwitch CLI Reference Guide
September 2009
page 32-25
ip access-list
Creates an access list for adding multiple IPv4 addresses to route maps.
ip access-list access-list-name
no ip access-list access-list-name
Syntax Definitions
access-list-name
Name of the access list (up to 20 characters).
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Use the no form of this command to delete the access list.
Examples
-> ip access-list access1
-> no ip access-list access1
Release History
Release 6.1.3; command was introduced.
Related Commands
MIB Objects
alaRouteMapAccessListNameTable
alaRouteMapAccessListName
alaRouteMapAccessListNameIndex
alaRouteMapAccessListNameAddressType
alaRouteMapAccessListNameRowStatus
Adds IPv4
addresses to the specified IPv4 access list.
Displays the details of the access list.