Alcatel-Lucent 6850-48 参考指南

IP Commands

page 32-58

OmniSwitch CLI Reference Guide

Configures the level of the ISIS route being redistributed.

ip route-map route-map-name [sequence-number number] set level {level1 | level2 | level1-2}

no ip route-map route-map-name [sequence-number number] set level {level1 | level2 | level1-2}

The name of the route map (up to 20 characters).

A number that links together the route maps. The range is 1–100.

Matches IS-IS Level-1 routes only

.

Matches IS-IS Level-2 routes only

.

Matches IS-IS Level1-2 routes.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to delete the set level parameter in the route map.

• All route maps having the same name but different sequence numbers are linked together and 

processed in order of increasing sequence number.

• The route-map-name and sequence-number should exist before you configure this set criteria.

-> ip route-map 111 sequence-number 50 set level level1

-> no ip route-map 111 sequence-number 50 set level level1

Release 6.2.1; command was introduced.

50