Alcatel-Lucent 6850-48 参考指南

IP Commands

page 32-62

OmniSwitch CLI Reference Guide

Configures the IPv6 address of the next hop in a route map.

ip route-map route-map-name [sequence-number number] set ipv6-nexthop ipv6_address

no ip route-map route-map-name [sequence-number number] set ipv6-nexthop ipv6_address

The name of the route map (up to 20 characters).

A number that links together the route maps. The range is 1–100.

IPv6 address of the next hop.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to delete the set ipv6-nexthop parameter in the route map.

• All route maps having the same name but different sequence numbers are linked together and 

processed in order of increasing sequence number.

• The route-map-name and sequence-number should exist before you configure this set criteria.

-> ip route-map 222 sequence-number 50 set ipv6-nexthop 2001::1

-> no ip route-map 222 sequence-number 50 set ipv6-nexthop 2001::1

Release 6.1.5; command was introduced.

50