Alcatel-Lucent 6850-48 参考指南
Chassis MAC Server (CMS) Commands
OmniSwitch CLI Reference Guide
September 2009
page 3-9
show mac-range alloc
Displays all allocated addresses from the MAC range table.
show mac-range [index] alloc
Syntax Definitions
index
Identifies the MAC range by referring to its position in the MAC range
table. Currently, index position 1 only is supported.
table. Currently, index position 1 only is supported.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
If you are assigning VLAN router ports while the switch is in single MAC router mode, all VLAN router
ports will use the base chassis MAC address (ID value 0).
ports will use the base chassis MAC address (ID value 0).
Examples
-> show mac-range alloc
Range Mac Address Application Id
-----+-----------------+--------------------+---
01 00:d0:95:6b:09:40 CHASSIS 0
01 00:d0:95:6b:09:41 802.1X 0
01 00:d0:95:6b:09:5f CHASSIS 1
output definitions
Range
The MAC range’s index number. The index number refers to the posi-
tion of the range in the MAC range table. Values may range from
1–20. MAC ranges are divided by index number into four distinct cate-
gories. Refer to
tion of the range in the MAC range table. Values may range from
1–20. MAC ranges are divided by index number into four distinct cate-
gories. Refer to
for more information.
Mac Address
Current MAC address allocated for a specific application.