Alcatel-Lucent 6850-48 参考指南
IP Commands
OmniSwitch CLI Reference Guide
September 2009
page 32-85
ip dos scan close-port-penalty
Assigns a penalty value to be added to the Denial of Service penalty scan value when a TCP or UDP
packet is received on a closed port.
packet is received on a closed port.
ip dos scan close-port-penalty penalty_value
Syntax Definitions
penalty_value
A penalty value added to the penalty scan value. This value can be any
non-negative integer.
non-negative integer.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
This command creates a point value that is added to the total port scan penalty value when a TCP or UDP
packet is received that is destined for a closed port.
packet is received that is destined for a closed port.
Examples
-> ip dos scan close-port-penalty 25
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaDoSConfig
alaDoSPortScanClosePortPenalty
parameter
default
penalty_value
10
Sets the threshold for the port scan value, at which a DoS attack is
recorded.
recorded.
Sets whether the switch generates SNMP DoS traps when an attack
is detected.
is detected.