Alcatel-Lucent 6850-48 参考指南
IP Commands
page 32-134
OmniSwitch CLI Reference Guide
September 2009
show udp statistics
Displays UDP errors and statistics.
show udp statistics
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
This command displays cumulative statistics since the last time the switch was powered on or since the
last reset of the switch.
last reset of the switch.
Examples
-> show udp statistics
Total datagrams received = 214937,
Error datagrams received = 0,
No port datagrams received = 32891,
Total datagrams sent = 211884
Release History
Release 6.1; command was introduced.
Related Commands
output definitions
Total datagrams received
Total number of UDP datagrams delivered to UDP applications.
Error datagrams received
Number of UDP datagrams that could not be delivered for any reason.
No port datagrams received
Number of UDP datagrams that could not be delivered for reasons
other than lack of application at the destination.
other than lack of application at the destination.
Total datagrams sent
Total number of UDP datagrams sent from this switch.
Displays the UDP Listener table.