Alcatel-Lucent 6850-48 参考指南
IPv6 Commands
page 33-52
OmniSwitch CLI Reference Guide
September 2009
show ipv6 tcp ports
Displays TCP Over IPv6 Connection Table. This table contains information about existing TCP connec-
tions between IPv6 endpoints.
tions between IPv6 endpoints.
show ipv6 tcp ports
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Only connections between IPv6 addresses are contained in this table.
Examples
-> show ipv6 tcp ports
Local Address Port Remote Address Port Interface State
--------------------+-------------------------------------+------+--------------+--------
:: 21 :: 0 listen
:: 23 :: 0 listen
2002:d423:2323::35 21 212:61:61:0:2b0:doff:fe43:d4f8 34144 v6if-6to4-137 established
2002:d423:2323::35 49153 212:61:61:0:2b0:d0ff:fe43:d4f8 34144 v6if-6to4-137 established
Release History
Release 6.1; command was introduced.
output definitions
Local Address
Local address for this TCP connection. For ports in the “Listen” state,
which accepts connections on any IPv6 interface, the address is ::0.
which accepts connections on any IPv6 interface, the address is ::0.
Port
Local port number for the TCP connection.
Remote Address
Remote IPv6 address for the connection. If the connection is in the
“Listen” state, the address is ::0.
“Listen” state, the address is ::0.
Port
Remote port number for the TCP connection. If the connection is in the
“Listen” state, the port number is 0.
“Listen” state, the port number is 0.
Interface
Name of the interface (or “unknown”) over which the connection is
established.
established.
State
State of the TCP connection as defined in RFC 793.