Alcatel-Lucent 6850-48 参考指南
IPv6 Commands
OmniSwitch CLI Reference Guide
September 2009
page 33-85
ipv6 rip interface recv-status
Configures IPv6 RIPng interface “Receive” status. When this status is set to "enable", packets can be
received on this interface. When it is set to "disable", packets will not be received on this interface.
received on this interface. When it is set to "disable", packets will not be received on this interface.
ipv6 rip interface if_name recv-status {enable | disable}
Syntax Definitions
if_name
IPv6 interface name.
enable | disable
Interface “Receive” status.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
RIPng must be loaded (
) and enabled (
)on the switch to send or receive pack-
ets on the interface.
Examples
-> ipv6 rip interface Test_Lab recv-status disable
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaRipngInterfaceTable
alaRipngInterfaceRecvStatus
parameter
default
enable | disable
enable
Loads RIPng into memory.
Enables/disables RIPng on the switch.
Configures IPv6 RIPng interface “Send” status.