Alcatel-Lucent 6850-48 参考指南

RDP Commands

page 35-2

OmniSwitch CLI Reference Guide

Enables or disables the Router Discovery Protocol (RDP) for the switch. 

ip router-discovery {enable | disable}

Enables RDP on the switch.

Disables RDP on the switch.

By default, RDP is disabled on the switch.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• The ip router-discovery command only activates RDP for the switch. No advertisements occur until 

an IP interface is configured with RDP.

• Note that if VRRP is enabled but there is no VRRP master on the network, RDP will not transmit 

advertisements. If a VRRP master is identified or VRRP is disabled, however, RDP will transmit 
advertisements as described in this chapter. 

-> ip router-discovery enable

-> ip router-discovery disable

Release 6.1; command was introduced.

alaRDPConfig

alaRDPStatus

Enables or disables an RDP interface.