Alcatel-Lucent 6850-48 参考指南

下载
页码 3444
RDP Commands
OmniSwitch CLI Reference Guide
September 2009
page 35-7
ip router-discovery interface max-advertisement-interval
Configures the maximum time, in seconds, RDP allows between each advertisement packet the router 
transmits on the specified interface.
ip router-discovery interface name max-advertisement-interval seconds
Syntax Definitions
name
The IP interface name that was defined at the time the IP interface was 
configured. 
seconds
The maximum amount of time allowed before the next advertisement 
occurs. The range is 4 to1800 seconds.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• The RDP interface maximum advertisement time is not active unless RDP is enabled on the switch and 
the specified interface is also enabled.
• Do not specify a value for the maximum advertisement interval that is less than the value specified for 
the minimum advertisement interval. To set the minimum advertisement interval value, use the
ip router-discovery interface min-advertisement-interval command.
• Note that the minimum and maximum advertisement values define an interval of time in which RDP 
transmits advertisement packets. RDP transmits packets at random times within this interval, waiting 
no longer than the maximum time specified and no sooner than the minimum time specified before the 
next transmission.
Examples
-> ip router-discovery interface Marketing max-advertisement-interval 350
-> ip router-discovery interface Accounting max-advertisement-interval 20
Release History
Release 6.1; command was introduced.
parameter
default
seconds
600