Alcatel-Lucent 6850-48 参考指南
RDP Commands
OmniSwitch CLI Reference Guide
September 2009
page 35-17
show ip router-discovery interface
Displays the current RDP status, related parameter values, and RDP traffic statistics for one or more
switch router interfaces.
switch router interfaces.
show ip router-discovery interface [name]
Syntax Definitions
name
The IP interface name that was defined at the time the IP interface was
configured.
configured.
Defaults
By default, the information for all RDP interfaces is displayed with this command.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• When an optional IP interface name is specified with this command, additional information about the
RDP interface is displayed.
• Use the show ip router-discovery command to display global RDP status and statistics for the entire
switch.
Examples
-> show ip router-discovery interface
IP i/f RDP i/f VRRP i/f Next #Pkts
Name
status status status(#mast) Advt sent/recvd
---------------------+--------+--------+--------------+----+----------
Marketing
Disabled Enabled Disabled(0) 9 0 0
Accounting
Disabled Enabled Disabled(0) 3 0 0
output definitions
Name
The user-defined IP interface name defined at the time the IP interface
was configured.
was configured.
IP i/f status
The IP status for this interface (Enabled or Disabled).
RDP i/f status
The RDP status for this interface (Enabled or Disabled).
VRRP i/f status (#mast)
The VRRP status for this interface (Enabled or Disabled), and the
number of VRRP masters on the network for this interface.
number of VRRP masters on the network for this interface.
Next Advt
Time remaining until the next advertisement is sent.
#Pkts sent/recvd
Number of advertisement packets sent from this interface; the number
of solicitation packets received on this interface.
of solicitation packets received on this interface.