Alcatel-Lucent 6850-48 参考指南
IPX Commands
page 38-20
OmniSwitch CLI Reference Guide
September 2009
ipx packet-extension
Enables/disables extended RIP/SAP packets. Larger RIP and SAP packets can be transmitted to reduce
network congestion. RIP packets can contain up to 68 network entries. SAP packets can contain up to 8
network entries. Extended RIP and SAP packets are disabled by default.
network congestion. RIP packets can contain up to 68 network entries. SAP packets can contain up to 8
network entries. Extended RIP and SAP packets are disabled by default.
ipx packet-extension [vlan] {enable | disable}
no ipx packet-extension [vlan]
Syntax Definitions
vlan
To enable/disable extended RIP/SAP packets on a specific VLAN, enter
the VLAN number.
the VLAN number.
enable
Enables extended RIP/SAP packets.
disable
Disables extended RIP/SAP packets.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000
Usage Guidelines
• Use the no form of this command to disable extended RIP/SAP packets.
• To enable/disable extended RIP/SAP packets on all VLANs, use only the basic command syntax (e.g.,
ipx packet-extension enable). Do not enter the optional vlan parameter.
• Transmitting larger RIP and SAP packets reduces network congestion; however, other switches and
routers in the network must support a larger, or extended, packet sizes if this feature is configured on
the switch.
the switch.
Examples
-> ipx packet-extension
Release History
Release 6.1; command was introduced.
Related Commands
parameter
default
enable | disable
disable
Displays the current status of extended RIP and SAP packets.