Alcatel-Lucent 6850-48 参考指南
VRRP Commands
page 40-6
OmniSwitch CLI Reference Guide
September 2009
vrrp address
Configures an IP address for a virtual router.
vrrp vrid vlan_id address ip_address
vrrp vrid vlan_id no address ip_address
Syntax Definitions
vrid
The virtual router ID, in the range from 1–255.
vlan_id
The VLAN on which the virtual router is configured.
ip_address
The virtual IP address associated with the specified virtual router.
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
A virtual router IP address must be configured before the virtual router can be enabled.
Examples
-> vrrp 1 3 address 10.10.3.2
-> vrrp 1 3 no address 10.10.3.2
Release History
Release 6.1; command was introduced.
Release 6.1.3; command modified; ip parameter is replaced by address parameter.
Release 6.1.3; command modified; ip parameter is replaced by address parameter.
Related Commands
MIB Objects
alaVrrp3AssoIpAddrTable
alaVrrp3AssoIpAddrRowStatus
Configures a new VRRP virtual router or modifies an existing one. Used
to enable to disable a virtual router.
to enable to disable a virtual router.
Displays statistics about VRRP packets for all virtual routers configured
on the switch or for a specific virtual router.
on the switch or for a specific virtual router.