Alcatel-Lucent 6850-48 参考指南
VRRP Commands
OmniSwitch CLI Reference Guide
September 2009
page 40-11
vrrp delay
Configures the amount of time allowed for routing tables to stabilize before virtual routers are started.
vrrp delay seconds
Syntax Definitions
seconds
The amount of time after a reboot that virtual routers will wait before
they go active; the range is 0 to 180 seconds.
they go active; the range is 0 to 180 seconds.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
Use this command to prevent loss of workstation connectivity before a virtual router becomes master.
Examples
-> vrrp delay 50
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaVRRPStartDelay
parameter
default
seconds
45 seconds
Configures a new VRRP virtual router or modifies an existing one. Used
to enable or disable a virtual router.
to enable or disable a virtual router.
Displays the virtual router configuration for all virtual routers or for a
specific virtual router.
specific virtual router.