Alcatel-Lucent 6850-48 参考指南

VRRP Commands

page 40-26

OmniSwitch CLI Reference Guide

Sets the new modified default value to all the virtual routers in a virtual router group.

vrrp group vrgid set [interval | priority | preempt | all] [override]

The virtual router group ID, in the range from 1–255.

Sets the VRRP advertisement interval value to the new default value. 

Sets the priority value to the new default value.

Sets the preempt mode to the new default mode.

Sets all the parameters’ value to the new default value.

Overrides the parameter’s configured value with the group default 
value. 

OmniSwitch 6850, 6855, 9000, 9000E

• All the virtual routers must be disabled before using this command.

• To apply the group default value to the virtual routers in a group, you must disable the virtual router 

group, then apply the group default value using the vrrp group set command and enable the virtual 
router group again.

• If any of the virtual routers in the group are running with their own configured parameter value, then 

that value will take priority over the group default value. To override the configured value with the 
group default value, you must first disable the virtual router group, then override the configured value 
by using the vrrp group set command with the override option and enable the virtual router group 
again.

->vrrp group 10 set priority

->vrrp group 10 set priority override

Release 6.3.1; command was introduced.