Alcatel-Lucent 6850-48 参考指南
OSPF Commands
page 41-52
OmniSwitch CLI Reference Guide
September 2009
ip ospf restart initiate
Initiates a planned graceful restart.
ip ospf restart initiate
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• You must execute this command on the primary CMM before executing a takeover command.
• The minimum hardware configuration for this command is a redundant CMM configuration. This
command is not supported on OmniSwitch chassis-based switches with a single CMM or OmniSwitch
stackable switches in a standalone configuration.
stackable switches in a standalone configuration.
• On OmniSwitch 6850 switches, a graceful restart is supported only on active ports (i.e., interfaces) that
are on the secondary or idle modules in a stack during a takeover. It is not supported on ports on a
primary switch in a stack.
primary switch in a stack.
Example
-> ip ospf restart initiate
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alaProtocolOspf
alaOspfRestartInitiate
Displays the OSPF graceful restart related configuration and status.