Alcatel-Lucent 6850-48 参考指南
Network Time Protocol Commands
page 5-30
OmniSwitch CLI Reference Guide
September 2009
show ntp server status
Displays the basic server information for a specific NTP server or a list of NTP servers.
show ntp server status [ip_address]
Syntax Definitions
ip_address
The IP address of the NTP server to be displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• This command displays information on the status of any or all configured NTP servers/peers.
• To display a specific server, enter the command with the server’s IP address. To display all servers,
enter the command with no server IP address.
Examples
-> show ntp server status
IP address = 172.18.16.147,
Host mode = server,
Peer mode = unspec,
Prefer = no,
Version = 4,
Key = 0,
Stratum = 16,
Minpoll = 4 (16 seconds),
Maxpoll = 10 (1024 seconds),
Delay = 0.000 seconds,
Offset = 0.000 seconds,
Dispersion = 0.000 seconds
Root distance = 0.000,
Precision = -6,
Reference IP = 0.0.0.0,
Status = not configured,
Uptime count = 28250 seconds,
Reachability = 0,
Unreachable count = 5,
Stats reset count = 27829 seconds,
Packets sent = 0,
Packets received = 0,
Duplicate packets = 0,
Bogus origin = 0,
Bad authentication = 0,
Bad dispersion = 0