Alcatel-Lucent 6850-48 参考指南
OSPFv3 Commands
page 42-34
OmniSwitch CLI Reference Guide
September 2009
show ipv6 ospf neighbor
Displays information on OSPFv3 non-virtual neighbors.
show ipv6 ospf neighbor [router ipv4_address][interface interface_name]
Syntax Definitions
ipv4_address
A 32-bit router ID of the neighboring router.
interface_name
The name of the interface.
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• This command is used to display all non-virtual neighbors of the OSPF router.
• See the Related Commands section below to modify the list.
Examples
-> show ipv6 ospf neighbor
Router ID Area/Transit Area State Interface
----------------+--------------------+-----+----------------------------------
1.1.1.1 0.0.0.0 FULL vlan-2071
3.3.3.3 0.0.0.0 FULL vlan-2071
5.5.5.5 0.0.0.0 FULL vlan-2071
23.23.23.23 0.0.0.1 FULL vlan-2055
23.23.23.23 0.0.0.1 FULL vlan-2056
24.24.24.24 0.0.0.1 FULL vlan-2065
24.24.24.24 0.0.0.1 FULL vlan-2066
-> show ipv6 ospf neighbor router 24.24.24.24
Router ID Area/Transit Area State Interface
----------------+--------------------+-----+--------------
24.24.24.24 0.0.0.1 FULL vlan-2070
24.24.24.24 0.0.0.1 FULL vlan-2073
output definitions
Router ID
The unique identification for the router.
Area/Transit Area
The area identifier.
State
The state of the OSPF neighbor adjacency.
Interface
The name of the interface.