Alcatel-Lucent 6850-48 参考指南

IS-IS Commands

page 43-4

OmniSwitch CLI Reference Guide

September 2009

ip load isis

Loads the IS-IS software on the router.

ip load isis

Syntax Definitions

N/A

Defaults

By default, IS-IS is not loaded on the switch.

Platforms Supported

OmniSwitch 6850, 9000, 9000E

Usage Guidelines

• You need to load IS-IS on the switch before executing any IS-IS configuration command.

• To unload IS-IS, remove all the IS-IS configuration from “boot.cfg”.

Examples

-> ip load isis

Release History

Release 6.2.1; command was introduced.
Release 6.3.1; support for OmniSwitch 9000 added.

Related Commands

MIB Objects

alaDrcTmIPIsisStatus

Displays switch routing protocol information and status.