Alcatel-Lucent 6850-48 参考指南
Network Time Protocol Commands
page 5-36
OmniSwitch CLI Reference Guide
September 2009
show ntp peers
Displays the information about the current status on the NTP peer association.
show ntp peers
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Use this command to display the tabular information on the current NTP peer association status.
Examples
-> show ntp peers
IP Address Ver Key St Delay Offset Disp
--------------+------+-----+-----+----------+--------------+--------------
172.23.0.202 4 0 3 0.300 0.404 0.0024
10.255.24.120 4 0 3 0.016 0.250 0.0017
Release History
Release 6.4.2; command was introduced.
output definitions
IP Address
Peer IP Address
Ver
The version of NTP the server is using. Versions 3 and 4 are valid.
Key
The NTP server’s public key. This must be accurate and the same as the
NTP server or the client switch will not be able to synchronize with the
NTP server. A zero (0) means there is no key entered.
NTP server or the client switch will not be able to synchronize with the
NTP server. A zero (0) means there is no key entered.
St
The stratum of the server.
Delay
The delay received from the server in its timestamp.
Offset
The offset received from the server in its timestamp.
Disp
The dispersion value received from the server in its timestamp.