Alcatel-Lucent 6850-48 参考指南
IS-IS Commands
OmniSwitch CLI Reference Guide
September 2009
page 43-45
show ip isis routes
Displays the IS-IS route information from the routing table.
show ip isis routes
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 9000, 9000E
Usage Guidelines
N/A
Examples
-> show isis routes
=================================================================================
ISIS Routes
=================================================================================
Prefix Metric Lvl/Type SPF-num Nexthop System ID
---------------------------------------------------------------------------------
1.1.1.0/24 10 1/Int 7 0.0.0.0 1720.2116.0051
2.2.2.0/24 10 1/Int 1 0.0.0.0 1720.2116.0051
3.3.3.0/24 10 1/Int 1 0.0.0.0 1720.2116.0051
4.4.4.0/24 10 1/Int 1 0.0.0.0 1720.2116.0051
5.5.5.0/24 10 1/Int 1 0.0.0.0 1720.2116.0051
6.6.6.0/24 10 1/Int 1 0.0.0.0 1720.2116.0051
---------------------------------------------------------------------------------
Routes : 8
=================================================================================
output definitions
Prefix
The IP prefix and mask of the destination routes.
Metric
The cost to reach the destination route.
Lvl/Type
The level and route type of the routes.
SPF-num
The version of the SPF calculation used to select the route.
Nexthop
The Next Hop address to reach the destination.
System ID
The system ID of the adjacent router. The system ID is a fixed size, six
octet field in the NSAP. In an IS-IS routing domain, each router is iden-
tified by a 6-octet hexadecimal system ID.
octet field in the NSAP. In an IS-IS routing domain, each router is iden-
tified by a 6-octet hexadecimal system ID.