Alcatel-Lucent 6850-48 参考指南
IS-IS Commands
OmniSwitch CLI Reference Guide
September 2009
page 43-75
ip isis interface level hello-interval
Configures the time interval between the successive Hello PDUs for the specified IS-IS level of an inter-
face.
face.
ip isis interface interface_name level [1 | 2] hello-interval seconds
no ip isis interface interface_name level [1 | 2] hello-interval
Syntax Definitions
interface_name
The name of the interface.
seconds
The Hello interval, in seconds. The valid range is 1–20000.
Defaults
Platforms Supported
OmniSwitch 6850, 9000, 9000E
Usage Guidelines
Use the no form of this command to restore the default settings.
Examples
-> ip isis interface man-1 level 1 hello-interval 50
-> no isis interface wan-876 level 2 hello-interval
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; support for OmniSwitch 9000 added.
Release 6.3.1; support for OmniSwitch 9000 added.
Related Commands
MIB Objects
vRtrIsisIfLevelTable
vRtrIsisIfLevelHelloTimer
parameter
default
seconds (designated routers)
3
seconds
(non-designated routers)
(non-designated routers)
9
Displays the IS-IS interface information.