Alcatel-Lucent 6850-48 参考指南

IS-IS Commands

page 43-80

OmniSwitch CLI Reference Guide

Configures the IS-IS router interface priority for the designated router election on a multi-access network.

ip isis interface interface_name level [1 | 2] priority number

no ip isis interface interface_name level [1 | 2] priority

The name of the given IP interface.

Specifies the IS-IS level as Level-1.

Specifies the IS-IS level as Level-2.

The priority value of this interface at this level. The valid range is
0–127.

OmniSwitch 6850, 9000, 9000E

• Use the no form of this command to restore the default value.

• The router with the highest priority is the preferred designated router.

• The designated router sends LSPs to this network and also to the routers that are attached to it.

-> ip isis interface vlan-isis level 1 priority 4

-> ip isis interface vlan-isis level 2 priority 4

-> no ip isis interface vlan-isis level 1 priority

Release 6.2.1; command was introduced.
Release 6.3.1; support for OmniSwitch 9000 added.

64