Alcatel-Lucent 6850-48 参考指南
BGP Commands
page 44-134
OmniSwitch CLI Reference Guide
September 2009
ip bgp policy route-map match-community
Configures a matching community primitive for the route map.
ip bgp policy route-map name sequence_number match-community [none | no-export | no-advertise |
no-export-subconfed | num:num]
no-export-subconfed | num:num]
Syntax Definitions
name
The route map name.
sequence_number
The route map sequence number. The valid range is 1–255.
none
Removes the community match from the route-map.
no-export
Routes in this community are advertised within the AS but not beyond
the local AS.
the local AS.
no-advertise
Routes matching the community restricting advertisement to any peer.
no-export-subconfed
Routes matching the community restricting advertisement to any exter-
nal BGP peer.
nal BGP peer.
num:num
The community number, given in the form of the AS number and the
community number, separated by a colon, as defined in RFC 1997.
community number, separated by a colon, as defined in RFC 1997.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
This command allows a matching community string primitive to be placed directly in the route map. By
default, no community string is specified. The default behavior can be reset by changing the value to
“none”.
default, no community string is specified. The default behavior can be reset by changing the value to
“none”.
Examples
-> ip bgp policy route-map routemap1 1 match-community 400:1 500 700:1
Release History
Release 6.1; command was introduced.
parameter
default
community_string
none