Alcatel-Lucent 6850-48 参考指南
BGP Commands
page 44-158
OmniSwitch CLI Reference Guide
September 2009
show ip bgp path
Displays BGP paths.
show ip bgp path
[ip_addr ip_address ip_mask]
[peer_addr peer_address]
[aspath-list aspathlist_name]
[community-list community_list_name]
[prefix-list prefix_name]
[route-map routemap_name]
[cidr-only]
[community community_number]
[neighbor_recv recv_peer_address]
[neighbor_adv adv_peer_addr]
[regexp “regular_expression”]
[best]
[peer_addr peer_address]
[aspath-list aspathlist_name]
[community-list community_list_name]
[prefix-list prefix_name]
[route-map routemap_name]
[cidr-only]
[community community_number]
[neighbor_recv recv_peer_address]
[neighbor_adv adv_peer_addr]
[regexp “regular_expression”]
[best]
Syntax Definitions
ip_address
A 32-bit IP address of the path.
ip_mask
A 32-bit subnet mask of the path.
peer_address
A 32-bit IP address of the path on which to filter.
aspathlist_name
AS path on which to filter.
community_list_name
Community name on which to filter.
prefix_name
Prefix on which to filter.
routemap_name
Route map on which to filter.
cidr-only
Filter out everything except CIDR routes.
community_number
Community number on which to filter.
recv_peer_address
Filter all except paths received from this path.
adv_peer_addr
Filter all except paths sent to this path.
regular_expression
Regular expression on which to filter. Regular expressions must be
enclosed by quotes. For example, “$100”.
enclosed by quotes. For example, “$100”.
best
Show only the best path.
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E