Alcatel-Lucent 6850-48 参考指南
Session Management Commands
page 6-30
OmniSwitch CLI Reference Guide
September 2009
who
Displays all active login sessions (e.g., Console, Telnet, FTP, HTTP, Secure Shell, and Secure Shell FTP).
who
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
You can identify your current login session by using IP address.
Examples
-> who
Session number = 0
User name = (at login),
Access type = console,
Access port = Local,
IP address = 0.0.0.0,
Read-only domains = None,
Read-only families = ,
Read-Write domains = None,
Read-Write families = ,
End-User profile =
Session number = 5
User name = admin,
Access type = telnet,
Access port = NI,
IP address = 128.251.17.176,
Read-only domains = None,
Read-only families = ,
Read-Write domains = All ,
Read-Write families = ,
End-User profile =
output definitions
Session Number
The session number assigned to the user.
User name
User name.
Access type
Type of access protocol used to connect to the switch.
Access port
Switch port used for access during this session.