Alcatel-Lucent 6850-48 参考指南
PIM Commands
OmniSwitch CLI Reference Guide
September 2009
page 45-57
show ip pim static-rp
Displays the PIM Static RP table for the ASM mode, which includes group address/prefix length, the
static Rendezvous Point (RP) address, and the current status of the Static RP configuration (i.e., enabled or
disabled).
static Rendezvous Point (RP) address, and the current status of the Static RP configuration (i.e., enabled or
disabled).
show ip pim static-rp
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
If the group prefixes configured for two or more rows in this table overlap, the row with the greatest prefix
length value is used for the overlapping range
length value is used for the overlapping range
Examples
-> show ip pim static-rp
Group Address/Pref Length RP Address Mode Override Precedence Status
---------------------------+-------------+-----+--------+----------+--------
224.0.0.0/4 172.21.63.11 asm false none enabled
output definitions
Group Address/Pref Length
The 32-bit IP address for a multicast group, along with the mask length,
shown in bits. The group IP address and mask are separated by a slash
( / ). To change the current multicast group address and mask, refer to
the
shown in bits. The group IP address and mask are separated by a slash
( / ). To change the current multicast group address and mask, refer to
the
RP Address
A 32-bit IP address of the Rendezvous Point (RP). To change the cur-
rent RP address, refer to the
rent RP address, refer to the
Mode
The PIM mode to be used for groups in this prefix. The possible values
include asm, ssm, or dm.
include asm, ssm, or dm.
Override
Specifies this static RP configuration to override the dynamically
learned RP information for the specified group(s).
learned RP information for the specified group(s).
Precedence
Specifies the precedence value to be used for this static RP configura-
tion.
tion.
Status
Displays whether static RP configuration is currently enabled or dis-
abled. Options include enabled and disabled. To change the current
status, refer to the
abled. Options include enabled and disabled. To change the current
status, refer to the
.