Alcatel-Lucent 6850-48 参考指南
PIM Commands
page 45-88
OmniSwitch CLI Reference Guide
September 2009
ipv6 pim spt status
Enables or disables last hop Designated Router (DR) switching to the Shortest Path Tree (SPT).
ipv6 pim spt status {enable | disable}
Syntax Definitions
enable
Enables last hop DR switching to the SPT.
disable
Disables last hop DR switching to the SPT.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• This command is supported only in the sparse mode.
• If the SPT status is enabled, last hop DR switching to the SPT begins once the first data packet is
received.
Examples
-> ipv6 pim spt status enable
-> ipv6 pim spt status disable
Release History
Release 6.3.1; command was introduced.
Related Commands
MIB Objects
alaPimsmGlobalConfig
alaPimsmV6SPTConfig
parameter
default
enable | disable
enable
Displays the status of the various global parameters for the IPv6
PIM sparse mode.
PIM sparse mode.