Alcatel-Lucent 6850-48 参考指南

PIM Commands

page 45-104

OmniSwitch CLI Reference Guide

Displays a list of active IPv6 PIM neighbors.

show ipv6 pim neighbor [ipv6_address] [if_name]

The IPv6 address for the PIM neighbor. 

The name of the interface.

If the neighbor’s IPv6 address or interface name is not specified, the entire IPv6 PIM neighbor table is 
displayed.

OmniSwitch 6850, 6855, 9000, 9000E

To view more detailed information about a particular neighbor, specify the neighbor's IPv6 address or the 
associated interface name in the command line. Additional information will be displayed, which includes 
LAN Prune Delay, Override Interval, TBit field, State Refresh capable, and Designated Router option 
status.

-> show ipv6 pim neighbor 

Neighbor Address               Interface Name       Uptime      Expires     DR Pri 

------------------------------+--------------------+-----------+-----------+------

fe80::2d0:95ff:feac:a537       vlan-30               02h:56m:51s 00h:01m:28s 1      

If a specific neighbor address is specified in the command line, detailed information for the correspond-
ing neighbor only displays:

-> show ipv6 pim neighbor fe80::2d0:95ff:feac:a537 

vlan-30

  Neighbor IPv6 Address        = fe80::2d0:95ff:feac:a537,

  Uptime                       = 02h:57m:09s,

  Expires                      = 00h:01m:40s,

  Lan Prune Delay Present      = True,

  Propagation Delay            = 500,

  Override Interval            = 2500,

  TBit Field                   = True,

  Gen ID Present               = True,

  Gen ID Value                 = 0x7720c123,

  BiDir Capable                = False,

  DR Priority Present          = True,

  DR Priority                  = 1,

  State Refresh Capable        = True,