Alcatel-Lucent 6850-48 参考指南
PIM Commands
page 45-118
OmniSwitch CLI Reference Guide
September 2009
show ipv6 pim groute
Displays all (*,G) state that the IPv6 PIM has.
show ipv6 pim groute [group_address]
Syntax Definitions
group_address
The IPv6 address of the Multicast Group.
Defaults
By default, entire (*,G) routing table is displayed. To view more detailed (*,G) state information about a
particular group, specify the group address in the command line.
particular group, specify the group address in the command line.
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
When the group_address is specified in the command line, the detailed information displayed also
includes the detailed state of every outgoing interface.
includes the detailed state of every outgoing interface.
Examples
-> show ipv6 pim groute
Total 1 (*,G)
Group Address RP Address RPF Interface UpTime
----------------------+-------------------+----------------------------+-----------
ff0e::7 5ffe::3 vlan-4 00h:01m:23s
-> show ipv6 pim groute ff0e::7
(*,ff0e::7)
UpTime = 00h:01m:28s
RP Address = 5ffe::3,
PIM Mode = ASM,
PIM Mode Origin = BSR,
Upstream Join State = Not Joined,
Upstream Join Timer = 00h:00m:00s,
Upstream Neighbor = fe80::220:fcff:fe1e:2455,
RPF Interface = vlan-4,
RPF Next Hop = fe80::220:fcff:fe1e:2455,
RPF Route Protocol = Static,
RPF Route Address = 5ffe::3/128,
RPF Route Metric Pref = 10,
RPF Route Metric = 10,
Interface Specific State:
vlan-3
UpTime = 00h:01m:28s,
Local Membership = False,
Join/Prune State = Joined,
Prune Pending Timer = 00h:00m:00s,